- Boshart Knowledge Base
- Pitless
-
Air Volume Controls
-
American Iron and Steel
-
Back Flow Prevention
-
Ball Valves
-
Bleeder Orfice
-
Brass Fittings
-
Bronze Threaded Pipe Fittings
-
Certifications
-
Check Valves
-
Chemical Compatibility
-
Chemical Composition
-
Clamps
-
Compression Coupling
-
Compression Fittings
-
Conflict Minerals
-
Constant Pressure Manifold
-
Control Box
-
CRN
-
Dielectric
-
Drain Back Valve
-
Drain Valves
-
Electrodes
-
Feet of Head
-
Filter Cartridge
-
Filter Housing
-
Filter Housings
-
Filtration
-
Flanges
-
Flare Fittings
-
Float Switch
-
Float Valve
-
Float Valves
-
Flow Controls
-
Foot Valves
-
Gallons
-
Galvanized
-
Gas
-
Gas Connector
-
Gate Valves
-
Gauges
-
Hand Pump
-
Heat Shrink
-
Hose
-
Hose Bibb
-
Hose Fittings
-
Insert Fittings
-
Iron Out
-
Jet Pumps
-
Leathers
-
Level Alarms
-
Literature
-
Malleable Iron Fittings
-
Manifolds
-
Merchant Coupling
-
Merchant Steel
-
Mounting Bracket
-
MTR
-
NPT Threads
-
NSF
-
O-Rings
-
PEX Fittings
-
PEX Valves
-
Pig Tail Syphon
-
Pipe
-
Pipe Column
-
Pipe Fittings
-
Pipe Nipples
-
Pitless
-
Pitless Adapter
-
Pitless Unit
-
Pressure Gauge
-
Pressure Snubber
-
Pressure Switch
-
Pressure Tank
-
PTFE
-
Pump Cable
-
Pump Saver
-
Push-Fit
-
PVC Fittings
-
PVC Pipe
-
Ratings
-
Relay
-
Relief Valves
-
Rope
-
Rope Hanger
-
Safety Data Sheets
-
Sewage Valves
-
Shaft Seals
-
Snifter Valve
-
SPIN-DOWN
-
Stainless Steel
-
Stainless Steel Fittings
-
Steam
-
Stop & Waste Valves
-
Sump Pump
-
Sump Pump Check Valve
-
Sweat
-
Tank Tee
-
Tank Tees
-
Technical Support
-
Thermometer
-
Thread Sealants
-
Torque Arrestor
-
Trouble Shooting
-
Tubing
-
Unit Conversions
-
Vacuum Breaker
-
Wall Hydrant
-
Warranty
-
Water Well Accessories
-
Well Cap
-
Well Caps
-
Well Packers
-
Well Point
-
Well Seal
-
Well Water Systems
-
Wire
-
Wiring
-
WROT
-
Yard Hydrants
-
Electrical Enclosures
-
Transition Couplings
-
Water Box
-
PEX Pipe
-
Combination Valve
-
Well Screen
How do I cross reference a Baker Pitless unit model number to a Boshart number?
The below diagram will help take the confusion out of the cross-referencing process. There are a few things that differ between Baker and Boshart which are explained below.
#1 – Boshart does not indicate the upper barrel size in the model number as our units are consistent in having an upper barrel (a.k.a. Pitless casing) that is 2” larger than the well casing. Alternatively, Baker units are not always 2” larger. For example, a Monitor (Baker) 6” Pitless unit will have a 7” upper barrel.
#2 - Boshart does not indicate “E” for equalization passages in the model number as equalization passages are standard in all our “Normal Well” Pitless units. If the Pitless is for a flowing well the spool type is ordered as “F”. Equalization passages are not an option on a sealed flowing well spool.
#3 - Boshart does not indicate or have an option to order built in check valves in the spool, therefore there is no number for the number of check valves in the Boshart model number.
#4 – Fittings to reduce or increase the size or type of connection are sold separately and are selected on pages 2 to 4 of the order forms which are found at the link below:
https://boshart.com/literature/ip-quote-request/
Additional Resources:
For more information on Pitless units see the "Municipal and Industrial Pitless Well Systems Booklet":
https://support.boshart.com/how-do-i-properly-install-my-pitless-adapter
https://support.boshart.com/how-do-i-install-a-spool-type-industrial-pitless-unit
https://support.boshart.com/do-the-spool-type-industrial-pitless-adapter-units-have-hold-down-hooks
https://support.boshart.com/how-do-i-install-a-wtcl-c-series-industrial-well-cap
For details on the well cap part numbers WTCL-C10 (8” Pitless units), WTCL-C12 (10” Pitless units), and WTCL-C14 (12” Pitless units), refer to the link below (details on pages 74 to 77):