Do you offer ¾” gas connectors?

Do you offer ¾” gas connectors?

No!

No! Boshart only carries 1/2" I.D. connectors. One must not confuse the ¾” O.D. flexible gas connector as 3/4" I.D., as they are sized by the internal diameter of the corrugated tube.

There is often confusion due to the connector fitting size on the ends of the flexible connector. For example, a ½” gas connector (½” I.D.) corrugated flexible tube can be supplied with 3/4” MPT or 3/4” FPT fittings. Selecting ¾” fittings does not make it a ¾” connector. It is important to not make this mistake as the BTU rating is determined by the tube I.D.  

Addition Information / Articles of Interest.

Data Sheet:

https://boshart.com/wp-content/uploads/product-assets/48e21f2a2668031f80f07bf8337266cdfa85f4a6_GACN_GASCONNECTOR_TECHNICALSHEETS.pdf

Sizing Article:

https://support.boshart.com/how-are-gas-connectors-sized

Catalog:

https://boshart.com/wp-content/uploads/product-assets/2b20b38c1f4186e3e205bc469977e682480ab2f2_Section_3_Boshart_Product_Catalog.pdf